Author Topic: Bandolero's versus stock vanguard  (Read 2210 times)

0 Members and 1 Guest are viewing this topic.

Offline ARC C63

  • Turf Warrior
  • **
  • Posts: 136
  • Karma: 0
  • Gender: Male
    • View Profile
    • http://www.facebook.com/#!/arcoon
Bandolero's versus stock vanguard
« on: June 16, 2017, 08:23:05 pm »
I need some help I bought a Bandelero vanguard engine it's a 35 horizontal shaft when I pulled the heads off it's got flattop pistons not like the regular stock vanguards with the dish Pistons are these have different rod Lengths  than the stock do these require the stock of arc rods or do they require the longer arc rods like if you cut the dish off the Pistons
C63            NELMRA
class Stock and SPB(aka crash test dumbs)
2010 Stock Class Champine

BIRTFT

Offline BIG AL 202

  • Highly Mowtivated
  • ****
  • Posts: 3327
  • Karma: 9
  • Gender: Male
  • LET'S GO FIND A NEW PLACE TO RACE MOWERS!
    • View Profile
Re: Bandolero's versus stock vanguard
« Reply #1 on: June 16, 2017, 09:24:18 pm »
I do believe people use intek pistons in Vanguards to up compression. I am not sure about the rods but I believe they could be ARC.
ALWAYS VOTE FOR ED!   FONGS BROTHER FROM ANOTHER MOTHER!

Offline notsofast

  • Newbie
  • *
  • Posts: 5
  • Karma: 0
    • View Profile
Re: Bandolero's versus stock vanguard
« Reply #2 on: June 16, 2017, 09:52:43 pm »
They use the stock rod in those motors so you will need the 6275 rod.