Author Topic: pulley size  (Read 2091 times)

0 Members and 1 Guest are viewing this topic.

Offline jakedog

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
pulley size
« on: January 27, 2016, 02:35:51 pm »
I currently run a 3" pulley with a 11 tooth sprocket on my peerless 700. Would a 4" pulley with a 14 tooth sprocket give more or less power. I can change my rear sprocket to achieve the same final ratio, just want to know if spinning yransmission slower is more torque or less. I know spinning it slower will save it.
Also governed with a 44 tooth sprocket, with 8" pulley on motor.

 

anything