Topic: Who's got parts?

[crazycraftsman]

Wondering who sells some good 5/8th by 5/8th spindles or 3/4 spindle by 5/8 inside bearing in barrel. 5/8th king pin. maybe weld your own kit or something . Looked bmi , hitch and EC .Thanks for any supplier .
Owen

[George Herrin]

No one that I AM  aware of. Not sure why ya need a 5/8 king pin. never seen a 1/2 fail

[Huffy044]

Most any local machine can turn you a set out, see if they have octagon stock, makes it easier to weld the spindle bolt on. I do the same thing and use a heim top and bottom for the bearings.

[stvn_VA]

Robert has always given me good service. 


http://stcroixchassis.webs.com/

[Gui961]

i make them with 5/8  king pin. i know other racer in our club  bend the 1/2  in the bumby track we have here . i have bend the 5/8 myself in a crash ... and the 5/8  last forever...

[crazycraftsman]

We run on mostly ruff tracks and don't trust 1/2 inch. I have not tryed 1/2 . I've been running steel rims with high speed bearing. Hard time keeping the bearings alive so wanting to change up to a hub and lighter wheel. Using 3/4 spindles with 5/8 kingpin now. Changing up to billet rims in front so looking for a nice set of spindles for two of my mowers.
Owen

[Robert Sparbel]

Thanks for the kind words Steven!