Author Topic: Right angle gearbox?  (Read 3794 times)

0 Members and 1 Guest are viewing this topic.

Offline mowpoweranything

  • Newbie
  • *
  • Posts: 79
  • Karma: 0
  • Gender: Male
  • charles hebert do it your selfer
    • View Profile
Right angle gearbox?
« on: May 09, 2014, 11:03:31 PM »
Ok guys I know this subject has probably been beaten to death but what type of right angle gearbox would hold up behind a 40ci intek twin i want something that will be reliable and there are so many out there i don't know which to choose. Can someone point me in the right direction please


                           Thanks in advance!
I can weld anything but the crack of dawn but im working on it.

Charles

Offline The Tank

  • Highly Mowtivated
  • ****
  • Posts: 3541
  • Karma: 11
  • Gender: Male
  • #44 Tank Racing!!!
    • View Profile
Re: Right angle gearbox?
« Reply #1 on: May 09, 2014, 11:23:50 PM »
Peerless 1000 series
Frank "The Tank" Woods

AKA "The Intek Outlaw"


Offline mowpoweranything

  • Newbie
  • *
  • Posts: 79
  • Karma: 0
  • Gender: Male
  • charles hebert do it your selfer
    • View Profile
Re: Right angle gearbox?
« Reply #2 on: May 09, 2014, 11:37:56 PM »
Tank where can i find those type at!
I can weld anything but the crack of dawn but im working on it.

Charles

Offline The Tank

  • Highly Mowtivated
  • ****
  • Posts: 3541
  • Karma: 11
  • Gender: Male
  • #44 Tank Racing!!!
    • View Profile
Re: Right angle gearbox?
« Reply #3 on: May 10, 2014, 05:00:12 PM »
Any Peerless dealer should be able to get you one. EC also has them.
http://eccarburetors.com/store/precision-mower-accessories/right-angle-gearbox.html
Frank "The Tank" Woods

AKA "The Intek Outlaw"

Offline mowpoweranything

  • Newbie
  • *
  • Posts: 79
  • Karma: 0
  • Gender: Male
  • charles hebert do it your selfer
    • View Profile
Re: Right angle gearbox?
« Reply #4 on: May 10, 2014, 05:29:37 PM »
Thanks tank I did some research and the 1050 gearbox looks to be a bit heavier duty with cast iron case I'mggoing to try and locate one of those units just don't know if it's a 1:1 ratio.
I can weld anything but the crack of dawn but im working on it.

Charles

Offline jerb

  • Highly Mowtivated
  • ****
  • Posts: 2895
  • Karma: 7
  • Gender: Male
    • View Profile
Re: Right angle gearbox?
« Reply #5 on: May 14, 2014, 12:12:11 AM »
last one i bought new was $180 from a dealer, for the life of me i cant remember part number but i am sure George has a number!
Tim Jerby
2010 round 2 monster energy drink mod-x champion
2009 mowfast mod-x champion
2009 mowfast sportsman runner-up
Coming soon...super mod twin!


Offline mowpoweranything

  • Newbie
  • *
  • Posts: 79
  • Karma: 0
  • Gender: Male
  • charles hebert do it your selfer
    • View Profile
Re: Right angle gearbox?
« Reply #6 on: May 16, 2014, 02:04:54 AM »
U know part numbers would be awesome. I spent all day at the small engine shop trying to find some type of number and even called peerless and I still have no information or numbers! !!!!!
I can weld anything but the crack of dawn but im working on it.

Charles

Offline The Tank

  • Highly Mowtivated
  • ****
  • Posts: 3541
  • Karma: 11
  • Gender: Male
  • #44 Tank Racing!!!
    • View Profile
Re: Right angle gearbox?
« Reply #7 on: May 16, 2014, 09:03:45 AM »
I don't have one for the one with the 3/4" output shaft but I run one with a 7/8" output shaft.

Peerless  2062-P91 RA series gearbox, P/N 794072. 7/8 input/output, keyed shafts.
Frank "The Tank" Woods

AKA "The Intek Outlaw"

Offline mowpoweranything

  • Newbie
  • *
  • Posts: 79
  • Karma: 0
  • Gender: Male
  • charles hebert do it your selfer
    • View Profile
Re: Right angle gearbox?
« Reply #8 on: May 16, 2014, 10:41:52 AM »
Thanks tank! !!!!!!
I can weld anything but the crack of dawn but im working on it.

Charles

 

anything