Author Topic: roller cam for 25 twin  (Read 7479 times)

0 Members and 1 Guest are viewing this topic.

Offline beezerboy

  • Newbie
  • *
  • Posts: 16
  • Karma: 0
    • View Profile
roller cam for 25 twin
« on: October 11, 2013, 01:42:54 am »
I know there are roller followers made for the Kohler twin.... how would the roller work with the stock cam? research suggests it might be worse without a cam specific for roller design. what cams are out there? everything I see is aimed at higher rpm ranges. my rpm must be kept below 4000, and 3800 is better because of my propellers (hovercraft)

I was planning on using a 27hp cam in my 25hp Command.

Offline royalblu68f100

  • Mow-Forum Junkie
  • ***
  • Posts: 1195
  • Karma: 4
  • Gender: Male
  • Cartwheels are a helluva ride if you can hold on!!
    • View Profile
Re: roller cam for 25 twin
« Reply #1 on: October 11, 2013, 06:58:23 am »
At those rpm's the benefit of a roller cam would be minuscule. Keep the stock style and get a better profile.
You never win a race by focusing on one aspect of the race!  Motor isn't everything, but you better have a good one!  Chassis too!  But remember, a driver can take a slow machine and make it faster!  I may not have/be the best of any of these but I'm trying!
Chris Cox- CP/Mod X, AP
2016 ALL AMERICAN CP/Mod X Champion
2015 USLMRA AP Champion
2014 USLMRA AP Runner Up
2013 USLMRA AP Champion
2012 SRUSAAO ModX/CP Champion
2012 USLMRA CP Champion
2012 US Open AP Champion
2011 SRUSAAO MOD-X/CP Champion
2011 USLMRA FX Points Runner up
2011 GALMRA CP Points Champion

Offline catfishdan

  • Newbie
  • *
  • Posts: 87
  • Karma: 0
  • Gender: Male
    • View Profile
Re: roller cam for 25 twin
« Reply #2 on: October 11, 2013, 07:24:26 am »
www.zkbrmachine.com

this guy is very easy to deal with. give him a call he will have everything you need. he has cams for low rpm like you are wanting
Dan

Hit it fast....rail it hard

Offline beezerboy

  • Newbie
  • *
  • Posts: 16
  • Karma: 0
    • View Profile
Re: roller cam for 25 twin
« Reply #3 on: October 11, 2013, 01:49:39 pm »
thanks guys... pretty much confirming my suspicions


Offline cycloneracer

  • Easy Parcheesy!!!!!!!
  • Global Moderator
  • Highly Mowtivated
  • *****
  • Posts: 4117
  • Karma: 37
  • Gender: Male
  • Easy Parcheesy!!!!!!!
    • View Profile
Re: roller cam for 25 twin
« Reply #4 on: October 11, 2013, 02:12:54 pm »
Call Zach.  He specializes in Kohler twins.   He can set you up.

Paul
Paul Krueger

****2017 USLMRA FXT points Champion****

#150 Worlds First "sidewinder" FX (now dismantled)

#150 FXT  Sponsored by Zach Kerber Machine. http://zkbrmachine.com/

Easy Parcheesy Racing