Author Topic: ARC's Kohler Twin Flywheel is shipping!  (Read 2264 times)

0 Members and 1 Guest are viewing this topic.

Offline ARC Racing

  • Global Moderator
  • Newbie
  • *****
  • Posts: 3
  • Karma: 0
    • View Profile
    • ARC Racing
ARC's Kohler Twin Flywheel is shipping!
« on: January 14, 2013, 09:25:57 AM »
http://www.arcracing.com/servlet/the-974/ARC-Billet-Flywheel-Kohler/Detail

Uses the Vanguard/Model 28 Coil (both facing out) which are sold separately at the following link:
http://www.arcracing.com/servlet/the-906/Ignition-Coil-Armature-Magneto/Detail

Coil brackets are included and may need clearancing from your intake manifold depending on the manifold you use.  We recommend you grind the coil bracket to accomplish this if it is necessary.

You may need to shim the starter slightly to keep the starter and ring gears from binding.  As always, lubricate the ring gear.  It is also a good idea to occasionally unbolt the ring gear from the flywheel and rotate it so the starter gear isn't hammering the same ring gear teeth over and over until they fail.



Offline Burton for Certain

  • Turf Warrior
  • **
  • Posts: 893
  • Karma: 4
  • Gender: Male
    • View Profile
Re: ARC's Kohler Twin Flywheel is shipping!
« Reply #1 on: January 14, 2013, 09:54:35 AM »
So it doesn't use the stock ring gear?
Drew Burton #19 FXS/FXT
Midwest Super Cub Racing

Nichols Performance Inc. For the tractor pulling
"Bad Company" PS/SS
"Triple Play" Open Super Stock Diesel

Small Engines Of Seymour High Performance Camshafts (Greg Hackman) 8125225577

Offline rceagle1a

  • Turf Warrior
  • **
  • Posts: 395
  • Karma: 2
  • Gender: Male
    • View Profile
Re: ARC's Kohler Twin Flywheel is shipping!
« Reply #2 on: January 14, 2013, 10:02:40 AM »
No, I talked to Tom a while back, It uses it's own gear. Here is a plus though,Say you are running a briggs intek you can order the ring gear, hub, and coil brackets for the Kohler and run your 6611 series wheel. I was thinkin about it. But I'm gonna stay briggs for this year money wise I don't think I can swing an engine change.
I am now aware all 6611 flywheel bodies are the same so making the switch to a twin from a single is as easy as a few part changes instead of a whole new wheel kit if you move up from single to twin or brand to brand.
Justin Altemeier, Newton, Iowa USA
Primarily Sponsored by: VanWall Powersports, Perry Iowa,Associate Sponsors:Mike's Machine and Repair, Reasnor Ia., Chris Talburt Custom Paint and Graphics, Ozark Mo.,Clymer Bros., Nelson Farms, Rick Crozier,K&W Enterprises, M&D Farms, Kelli Aldrich, Colfax Auto Parts, Webb Family Farms, Nuzum Services, Colfax Tractor Parts,HERRIN MOWERSPORTS
 



To WIN is EVERYTHING!!!!!!
To LOSE just plain SUCKS!!!!!!


Offline Burwell555

  • Hot Rod Hitman
  • Highly Mowtivated
  • ****
  • Posts: 2983
  • Karma: 12
  • Gender: Male
    • View Profile
Re: ARC's Kohler Twin Flywheel is shipping!
« Reply #3 on: January 14, 2013, 12:22:54 PM »
Here is a plus though, if you are running a briggs intek you can order the ring gear, hub, and coil brackets for the Kohler and run your intek twin wheel.

I thought you could do that with all mower wheels? As in they all use the same flywheel part and the rest was the differences
Zach Burwell
#555 of Triple Nickel Racing


Wanna know a quick way to lose 8 pounds?!

Offline Rooster

  • Global Pot Stirrer
  • Highly Mowtivated
  • ****
  • Posts: 8255
  • Karma: 73
  • Gender: Male
  • Winning is always fair!!
    • View Profile
    • Cut Loose Racing
Re: ARC's Kohler Twin Flywheel is shipping!
« Reply #4 on: January 14, 2013, 02:29:47 PM »
I thought you could do that with all mower wheels? As in they all use the same flywheel part and the rest was the differences
No, many of them use the 6611 wheel, but not all!
Bert stole my cookies!!
 I think he used them to bribe Ed into something naughty?

http://www.cutlooseracing.com

Offline George Herrin

  • aka SUPERMAN
  • Superman
  • Highly Mowtivated
  • *
  • Posts: 17732
  • Karma: 102
  • Gender: Male
  • I am going to Race Every Race like its my last one
    • View Profile
    • BTMRA Home/Forum An Independant Club.
Re: ARC's Kohler Twin Flywheel is shipping!
« Reply #5 on: January 14, 2013, 07:55:10 PM »
ALL briggs motors except the apposed and model 19 along with the Tecumseh Twin and the kawi and now the Kohler use the same 6611 body. The difference between models is hub and ring gears and coil mount accessories.
George Herrin #6
Indian Power.. You gotta Go big to beat em or Go HOME
8 time ARMA National Champion
4 time USLMRA National Champion
Retired from BP
www.herrinmowersports.yolasite.com
www.allamericanmowerchampionships.yolasite.com
My other racer is a 1/5th scale Dirt Late Model!!!!

Offline supermod

  • Turf Warrior
  • **
  • Posts: 270
  • Karma: 0
  • Gender: Male
    • View Profile
    • http://nelmro.com
Re: ARC's Kohler Twin Flywheel is shipping!
« Reply #6 on: January 16, 2013, 07:52:05 PM »
when is arc going to have rods out?     working on a 83mm twin if arc make a stock rod i could bore block around .020 over and use a 49 intek twin piston, rist pin in intek is around .004 larger so a little and this could happen
Brian Calabrese


Offline FlatheadPuller

  • Turf Warrior
  • **
  • Posts: 967
  • Karma: 12
  • Gender: Male
    • View Profile
Re: ARC's Kohler Twin Flywheel is shipping!
« Reply #7 on: January 16, 2013, 08:16:09 PM »
kerber has stock length rods.
Dennis Bazzett
Grandville Michigan

Offline supermod

  • Turf Warrior
  • **
  • Posts: 270
  • Karma: 0
  • Gender: Male
    • View Profile
    • http://nelmro.com
Re: ARC's Kohler Twin Flywheel is shipping!
« Reply #8 on: January 16, 2013, 08:29:13 PM »
cool i been on the side line with the kohlers, but looking to get my feet wet  :woo:
Brian Calabrese

 

anything