Author Topic: Help With Hand throttle connection to Kohler 12.5 Command  (Read 2770 times)

0 Members and 1 Guest are viewing this topic.

Offline wegian_63

  • Newbie
  • *
  • Posts: 27
  • Karma: 0
    • View Profile
Help With Hand throttle connection to Kohler 12.5 Command
« on: July 31, 2012, 03:59:45 pm »
Need some help on how others have connected their Hand throttle to their carbs governor linkage on their 12.5 command Kohler engines?

I mounted throttle clamp to my shroud cover and the end of the cable to the old throttle linkage and doesnt want to pull very well.  Squeeze the throttle so hard it almost snaps the hand throttle.

Wanted to hook directly to the carb but the carbs on these, the governor arm pushes the throttle open and closed, not pull like on my Briggs engine carbs that I have on my MTD's.

any ideas or pics would help a lot.  Thanks.
Chris Zachariason

No Gutz No Glory!!