Having issues with a carburetor that has me wanting to
this thing. First off its a 390 .020 over, mild cam, with a blillet flywheel. The carb is a .925 bore from AGK. Having problems with it dumping fuel out the vent and running rich. I've checked and cleaned this several times, changed main jets out and emulsion tube. It also wants to fall on its face coming out of the corners but comes to life after its on the top end. Everything I have tried has not worked. I can put stock carb back on with a main jet change and it runs flawlessly with a good plug reading. Any ideas whats going on?