Picked up a 69 or somewhere around there john deere 110 with a 8 Horse Kohler. The previous owner hacked up the wiring, it looks like they just cut the whole key assembly out of it, but im not sure if thats all that was done. I picked up a push button switch for the starter, as well as a toggle switch for the ignition. I was wondering if anyone had a simple wiring diagram that i could reference to (I'm not that great at wiring), It does not have the big external coil (if that makes a difference) I do not need to run the volt meter, or any of the saftey switches as I will no longer be using the pto or anything like that. I am simply going to push snow with it and pull it at a local garden tractor pulling event in the summer time. Thanks for your help!