Topic: 16 hp vanguard carb mod's

[blue demon]

I have a 16 hp vanguard horazontal #404337 signal carb.
I was thinking of honing out the center of the carb so it has a straight smooth flow, Iam not sure if this would help or make problems .
        The brass tube that the gas comes out of would need to be changed, the jet drilled out a little bigger and made adjustable, not sure about the low side jet.
        The motor is not supper built , just open exhuast,billit flywheel and no governer.I will be adding a cam next year . Again this is just somthing Iam thinking about and thought I would ask everyone what they think about the Idea....

[Toadworks]

Look up venturi design before you hog out the center of that carb.

[slideways]

Just buy the bigger bore carb from an 18hp. I have a few i'd sell you. That way you don't have to worry about boring too far etc.. You can open them up somewhat but removal of the e-tube isnt easy on that carb.

[chini]

   Hey dude give me a call, I might be able to give you some help on this. Kevin