Topic: exhaust

[mowerracer828]

hey, i am going to be building my exhaust system for my 16hp vangaurd twin, i have the flanges for 1 1/4", what thickness is right for these flanges im thinking .35". also i am doing a 2 into one , what is the best tubing size and thickness for the 2 into one, thanks tyler

[Lambo]

Go to the search tab near the top of the page. Lots of talk about exhaust, and pretty much EVERYTHING else.

Lambo

[Burwell555]

And exhaust design, size, and collector and so on depends on what is done to your motor and where you want your motor to shine in the power band

[mowerracer828]

hey, i have searched numerous times and not found much of anything, if you could just help me with one question, i am doin a 2 into one and i will join the 2 into 1 between 12" and 15" after the heads, but the way i am planning to run the pipe will make the 2" collector about 2 1/2' to 3 1/2' im not sure if that will work or not, thanks tyler

[THawley08]

Exhaust is trial and error. No one can tell you exactly what to run for exhaust. Size for primarys 1" ID or 1.25" ID will get you close

Sent from my Droid using Tapatalk