I am having a bad day here...Started out getting motor tuned, was turning 8500 easy,
Then all of a sudden started blowing smoke out the breather and slowing down....reved to 7900 then only 7200 and i shut it down..
Drained oil (new from yesterday) and it was black with a gray shine to it...
Pulled the pan and found I spun a bearing...oil dipper which is supposed to lock it in had turned itself out and bearing spun in rod end...
Going to rush order some new bearings, and polish out the crank is ther anything else I should be on the look out for..?
I know I torqued it correctly, bolts were still tight when I took it apart...