Author Topic: 20 hp vanguard carb trouble  (Read 11877 times)

0 Members and 2 Guests are viewing this topic.

Offline MTD #77

  • Newbie
  • *
  • Posts: 43
  • Karma: 0
  • Gender: Male
    • View Profile
20 hp vanguard carb trouble
« on: March 27, 2010, 09:39:26 pm »
Ok i have a 20 hp vanguard and it has a 2 barrell carb on it. It will run fine with no load on it but when u get on the gas in like 3rd or 4th gear it will only cut down to one cylinder. And its the right cylinder that is cutting out but when it does this it will throw flames out of the right side exoust pipe. And ive torn the carb down 3 times and cleaned it all out and it still does it. Thanks 4 the help if anyone can help... lol
Curtis Sylvester

Offline Feather Head

  • Turf Warrior
  • **
  • Posts: 317
  • Karma: 1
  • Gender: Male
    • View Profile
Re: 20 hp vanguard carb trouble
« Reply #1 on: March 27, 2010, 09:46:35 pm »
Did you check the coil or the spark plug?
Nathan Mesalk
Mod-X #308
2010 US Rookie of the Year
http://www.bsmra2.com/

Offline MTD #77

  • Newbie
  • *
  • Posts: 43
  • Karma: 0
  • Gender: Male
    • View Profile
Re: 20 hp vanguard carb trouble
« Reply #2 on: March 27, 2010, 09:56:33 pm »
Well i took a timeing light and hooked it up to the right cylinder and it seems to be fireing every time and i pulled the plug out and it was a powdery white color and for the race i ran tonight i took a carb and intake off of a 16 hp vanguead and it ran ok but it was running really rich 4 some reasion. I let it sit there and run while i went to draw and i walked over to it and hit the gas and it looked like i was running a deseal engin. lol but it cleared up.
Curtis Sylvester

Offline Tony Loveless

  • Turf Warrior
  • **
  • Posts: 889
  • Karma: 2
  • Gender: Male
  • Tony Loveless Racing
    • View Profile
Re: 20 hp vanguard carb trouble
« Reply #3 on: March 28, 2010, 12:32:34 am »
Is this a stock carb?
B/p #33t
L & M Racing
Loveless Racing Engines
Domownator Chassis
2009 ARLMRA B/P Champion
2009 ARLMRA A/P Champion
2010 ARLMRA B/P Champion
2012 ARLMRA B/P Champion
WWW.Facebook.com/tonyloveless33t
http://sports.groups.yahoo.com/group/arlmra/

Offline MTD #77

  • Newbie
  • *
  • Posts: 43
  • Karma: 0
  • Gender: Male
    • View Profile
Re: 20 hp vanguard carb trouble
« Reply #4 on: March 28, 2010, 08:07:32 am »
Yeah :( It use to run good tho. Is there any way i can modify it?
Curtis Sylvester

Offline George Herrin

  • aka SUPERMAN
  • Superman
  • Highly Mowtivated
  • *
  • Posts: 17732
  • Karma: 102
  • Gender: Male
  • I am going to Race Every Race like its my last one
    • View Profile
    • BTMRA Home/Forum An Independant Club.
Re: 20 hp vanguard carb trouble
« Reply #5 on: March 28, 2010, 09:01:57 am »
EC has new race prepped  nikki style carbs (Bigger Venturi and Bigger Throttle bore) for less than 200.00 Just got em in. Havn't even advertised them yet. Don't have an exact price. They are not polished out but the flow on them as is is as good as the standard 20 hp carb that is bored and polished. If you have any kind a built twin these should wake em up. Will work for any vanny or Intek Motor. They can be polished out but the cost will go up. We have 20 on the shelf...Call us Monday 9 to 5 central for more specifics.
George Herrin #6
Indian Power.. You gotta Go big to beat em or Go HOME
8 time ARMA National Champion
4 time USLMRA National Champion
Retired from BP
www.herrinmowersports.yolasite.com
www.allamericanmowerchampionships.yolasite.com
My other racer is a 1/5th scale Dirt Late Model!!!!

Offline MTD #77

  • Newbie
  • *
  • Posts: 43
  • Karma: 0
  • Gender: Male
    • View Profile
Re: 20 hp vanguard carb trouble
« Reply #6 on: March 28, 2010, 10:28:17 am »
Thanks George. ill see wat i can do.
Curtis Sylvester

Offline Tony Loveless

  • Turf Warrior
  • **
  • Posts: 889
  • Karma: 2
  • Gender: Male
  • Tony Loveless Racing
    • View Profile
Re: 20 hp vanguard carb trouble
« Reply #7 on: March 28, 2010, 11:58:32 am »
EC has new race prepped  nikki style carbs (Bigger Venturi and Bigger Throttle bore) for less than 200.00 Just got em in. Havn't even advertised them yet. Don't have an exact price. They are not polished out but the flow on them as is is as good as the standard 20 hp carb that is bored and polished. If you have any kind a built twin these should wake em up. Will work for any vanny or Intek Motor. They can be polished out but the cost will go up. We have 20 on the shelf...Call us Monday 9 to 5 central for more specifics.
That sounds like my next upgrade to my motor lol
B/p #33t
L & M Racing
Loveless Racing Engines
Domownator Chassis
2009 ARLMRA B/P Champion
2009 ARLMRA A/P Champion
2010 ARLMRA B/P Champion
2012 ARLMRA B/P Champion
WWW.Facebook.com/tonyloveless33t
http://sports.groups.yahoo.com/group/arlmra/

Offline MTD #77

  • Newbie
  • *
  • Posts: 43
  • Karma: 0
  • Gender: Male
    • View Profile
Re: 20 hp vanguard carb trouble
« Reply #8 on: March 29, 2010, 11:19:01 am »
Lol yeah, that might have to be my next up grade too. But i was just wondering if anyone can help me figure out wats wrong with my carb i have now. I put it back on my mower yesterday and started it up. It will iddle really high now and this is even with the idle screw takin out and it will run on both cylinders only at idle. Ill hit the gas and it does nothing till i give it full throttle it will just hit on one cylinder. Im compleatly lost about this.  :(
Curtis Sylvester

Offline JohnB

  • Turf Warrior
  • **
  • Posts: 327
  • Karma: 3
  • Gender: Male
  • voodoo twin racing
    • View Profile
    • johnb
Re: 20 hp vanguard carb trouble
« Reply #9 on: March 29, 2010, 11:49:56 am »
Try swapping with a known good carb. If problem still happens then problem is in the motor. If it fixs the problem, then it is the carb. When you broke down the carb, was the bowl full? if so, you could have trash in the idle paassageways. I had a problem like that and I took off the bowl. I had to take pipe cleaner to them and carb cleaner. I got a lot of varnish from old gas out it. I took the jets and cleaned them with cutting torch tip cleaner(wire type). Put it back togather and has been running good ever since. You can try this, but I am no carb expert like Superman is.
Earn your way, nothing is given to you!
D' Mow Letion

Offline MTD #77

  • Newbie
  • *
  • Posts: 43
  • Karma: 0
  • Gender: Male
    • View Profile
Re: 20 hp vanguard carb trouble
« Reply #10 on: March 29, 2010, 12:09:32 pm »
Well 4 the race saterday i put on a 16 hp carb and intake and it did ok. it was running WAY rich tho... lol But the otherday i had my 2 barrel carb and intake on it and gas kept blowing out of the overflow tube and i looked at the float and no gas was in it so it didnt have i hole in it and i took i longer neiddle in it and it stopped the over flow probablum but do u think i should put the shorter neiddle back in it?? Do u think thats my probablum?
Curtis Sylvester

Offline JohnB

  • Turf Warrior
  • **
  • Posts: 327
  • Karma: 3
  • Gender: Male
  • voodoo twin racing
    • View Profile
    • johnb
Re: 20 hp vanguard carb trouble
« Reply #11 on: March 29, 2010, 03:22:00 pm »
That is a question for Superman. i would check the short needle and seat area. You may see where it maybe damaged and worn. Attach a piece of clean fuel line and blow thru it. While doing this, move float up and down to check the flow. when it up it should not allow any flow. If it does, that is where your problem is. Like I said I am no expert, I use a logical approach to solve my problems.Hope this helps.
Earn your way, nothing is given to you!
D' Mow Letion

Offline MTD #77

  • Newbie
  • *
  • Posts: 43
  • Karma: 0
  • Gender: Male
    • View Profile
Re: 20 hp vanguard carb trouble
« Reply #12 on: March 29, 2010, 03:25:24 pm »
Thanks John. ill try that and get back to ya.
Curtis Sylvester

Offline MTD #77

  • Newbie
  • *
  • Posts: 43
  • Karma: 0
  • Gender: Male
    • View Profile
Re: 20 hp vanguard carb trouble
« Reply #13 on: April 12, 2010, 10:00:52 pm »
Hey George. Do u still have any of those 2 barrel carbs 4 a 20 Vanny? and if so how much do u think they will cost?
Curtis Sylvester

Offline George Herrin

  • aka SUPERMAN
  • Superman
  • Highly Mowtivated
  • *
  • Posts: 17732
  • Karma: 102
  • Gender: Male
  • I am going to Race Every Race like its my last one
    • View Profile
    • BTMRA Home/Forum An Independant Club.
Re: 20 hp vanguard carb trouble
« Reply #14 on: April 12, 2010, 11:50:47 pm »
yes 165.00 plus shipping
George Herrin #6
Indian Power.. You gotta Go big to beat em or Go HOME
8 time ARMA National Champion
4 time USLMRA National Champion
Retired from BP
www.herrinmowersports.yolasite.com
www.allamericanmowerchampionships.yolasite.com
My other racer is a 1/5th scale Dirt Late Model!!!!

 

anything