Author Topic: Wich Peerless is better?  (Read 8400 times)

0 Members and 1 Guest are viewing this topic.

Offline TomC

  • Turf Warrior
  • **
  • Posts: 122
  • Karma: 0
    • View Profile
Wich Peerless is better?
« on: November 05, 2005, 10:49:54 am »
*Wich Peerless is better?*
Post by UndergroundTech on May 16, 2005, 5:43pm


I have a Peerless 930-005 & a 920-041 and need to know wich is the
better transaxle.
------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by George Herrin on May 17, 2005, 4:07pm


I have had good luck with the 920's in past years. not familiar with the
other.
George
------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by UndergroundTech on May 17, 2005, 6:19pm


Thanks George :)
One other thing... Are the MTD 717-761 transaxles any good, I also have
two of those.
------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by George Herrin on May 17, 2005, 6:52pm


No not for racing. George
------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by UndergroundTech on May 17, 2005, 8:23pm


OK.... Thank for the info ;)
------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by Squidd on May 17, 2005, 9:44pm


So what makes one transaxel or tranny better than another...

Bushings vs bearings...castings...shaft size... or steel vs aluminum
gears...??

Is there a "list" somewhere or could you post a few "numbers/brands"
that are "favored" ..

Would be of help in the "search" at the junkyards/shops to know the
numbers ahead of time..

TIA..

------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by H2Mow on May 17, 2005, 9:53pm


700 series or 350 series Peerless tranny's and 820-017 ( hard to find)
trans axles. The 820's had a 1" axle. Some have luck with 920 trans
axles also and the 600 series are not bad either.
------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by Squidd on May 17, 2005, 10:14pm


Thanks Eric...

How about an 806-D..? (Transaxel)
------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by H2Mow on May 18, 2005, 7:27pm


It should work and it looks like that number trans axle has bearings for
the axles. ;)
------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by UndergroundTech on Jul 26, 2005, 12:08am


Aside from changing the pulleys, is there anything I can do to improve
my otherwise stock Peerless 920 for racing?

Also are the 820-017's the only ones with the 1" axle?
and is there possi-traction available for Peerless tansaxles or is the
solid axle the only way to go?
------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by mowmanscott on Jul 26, 2005, 6:11am


were can I get a solid axel for these transmission or what is the best
way to mak it? scott
------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by UndergroundTech on Aug 16, 2005, 3:03pm



*Jul 26, 2005, 12:08am
UndergroundTech wrote:*

Quote
"Aside from changing the pulleys, is there anything I can do to improve
my otherwise stock Peerless 920 for racing?

Also are the 820-017's the only ones with the 1" axle?
and is there possi-traction available for Peerless tansaxles or is the
solid axle the only way to go?"




BUMP
------------------------------------------------------------------------