*Wich Peerless is better?*
Post by UndergroundTech on May 16, 2005, 5:43pmI have a Peerless 930-005 & a 920-041 and need to know wich is the
better transaxle.
------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by George Herrin on May 17, 2005, 4:07pmI have had good luck with the 920's in past years. not familiar with the
other.
George
------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by UndergroundTech on May 17, 2005, 6:19pmThanks George
One other thing... Are the MTD 717-761 transaxles any good, I also have
two of those.
------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by George Herrin on May 17, 2005, 6:52pmNo not for racing. George
------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by UndergroundTech on May 17, 2005, 8:23pmOK.... Thank for the info
------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by Squidd on May 17, 2005, 9:44pmSo what makes one transaxel or tranny better than another...
Bushings vs bearings...castings...shaft size... or steel vs aluminum
gears...??
Is there a "list" somewhere or could you post a few "numbers/brands"
that are "favored" ..
Would be of help in the "search" at the junkyards/shops to know the
numbers ahead of time..
TIA..
------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by H2Mow on May 17, 2005, 9:53pm700 series or 350 series Peerless tranny's and 820-017 ( hard to find)
trans axles. The 820's had a 1" axle. Some have luck with 920 trans
axles also and the 600 series are not bad either.
------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by Squidd on May 17, 2005, 10:14pmThanks Eric...
How about an 806-D..? (Transaxel)
------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by H2Mow on May 18, 2005, 7:27pmIt should work and it looks like that number trans axle has bearings for
the axles.
------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by UndergroundTech on Jul 26, 2005, 12:08amAside from changing the pulleys, is there anything I can do to improve
my otherwise stock Peerless 920 for racing?
Also are the 820-017's the only ones with the 1" axle?
and is there possi-traction available for Peerless tansaxles or is the
solid axle the only way to go?
------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by mowmanscott on Jul 26, 2005, 6:11amwere can I get a solid axel for these transmission or what is the best
way to mak it? scott
------------------------------------------------------------------------
*Re: Wich Peerless is better?*
Post by UndergroundTech on Aug 16, 2005, 3:03pm*Jul 26, 2005, 12:08am
UndergroundTech wrote:*"Aside from changing the pulleys, is there anything I can do to improve
my otherwise stock Peerless 920 for racing?
Also are the 820-017's the only ones with the 1" axle?
and is there possi-traction available for Peerless tansaxles or is the
solid axle the only way to go?"
BUMP
------------------------------------------------------------------------